How to Remove Your GWM and Ora Wipers - Service Mode

Applies to: Ora Funky Cat, Ora 07, GWM Tank

Need to reach the wipers on your GWM and Ora? Some models use service mode. Others let you lift the wiper arms straight from the windscreen. Use the steps below for the models listed here.

How to Access Your GWM and Ora Wiper Blades

1. Turn your car off.
2. Within 10 seconds push the wiper stalk to the mist position and hold for about 3 seconds.
3. The wipers will move to a service position.
4. You can now change the blades.
5. To return: turn the car on and activate the wipers once.

Just one quick check

The Ora Funky Cat and Ora 07 are fully electric vehicles with mainly controlled through the touchscreen. If the stalk sequence does not trigger the service mode check the vehicle settings on the central display for a wiper service mode option.

Make Sure the Blades Fit

Wiper sizes and fittings can change between versions of the same model. Enter your registration and we'll match your car with the correct front and rear blades.

We’ll also send the fitting video and any service-mode steps your car needs. Open the box and you’re ready to go.

Find the right wipers for your GWM and Ora →