How to Remove Your BYD Wipers - Service Mode

Applies to: Atto 3, Seal, Seal U, Dolphin, Han, Tang, Sealion 6, Sealion 7

Need to reach the wipers on your BYD? Some models use service mode. Others let you lift the wiper arms straight from the windscreen. Use the steps below for the models listed here.

How to Access Your BYD Wiper Blades

1. Turn your car off.
   
2. Within 10 seconds push the wiper stalk to the mist or single wipe position and hold for about 3 seconds.
   
3. The wipers will lift to a vertical service position.
   
4. You can now change the blades.
   
5. To return: turn the car on and activate the wipers once.

Just one quick check

BYD models are mainly controlled through the touchscreen. Some variants allow wiper service mode to be activated through the vehicle settings menu on the central display as an alternative to the stalk sequence. Check Settings → Vehicle → Wiper Service Mode if the stalk sequence does not trigger.

Make Sure the Blades Fit

Wiper sizes and fittings can change between versions of the same model. Enter your registration and we'll match your car with the correct front and rear blades.

We’ll also send the fitting video and any service-mode steps your car needs. Open the box and you’re ready to go.

Find the right wipers for your BYD →